The addition of chlorine tablets is only the beginning of guaranteeing quality water. If you want the pool kept hygienically clean at all times and and and turn it into a healthy habitat for family members and friends to swim safely, there are several important steps to watch out. Next, I will introduce the points of use and aftercare of chlorine tablets in pool sanitizing.
I. Accurately monitor water quality
1.Residual chlorine content detection
After placing chlorine tablets in the pool, the principal task is to monitor the residual concentration of chlorine. It is a very significant parameter to ascertain pool water safety. Normally, the level should be in the range of 0.3-1.0mg/L.
You may utilize professional testing equipment, including residual chlorine testers and water quality detectors. Let’s take the residual chlorine tester for example.
First, fill sufficient pool water into the colorimetric tube. Second, add the test agent and shake the tube vigorously. Third, measure the resulting color and compare it with the standard colorimetric card to determine the residual chlorine level within seconds. It is suggested to test 1-2 times per day, particularly after the busy swimming season.
2.pH adjustment
Apart from residual chlorine, pH also plays a very important role. A good range of 7.2-7.6 guarantees the tablets can demonstrate their best disinfection ability and minimize human skin and machine irritation.
The moment a deviant pH reading is discovered, a pH adjuster can be added to remedy it. If the pH is low, sodium hydroxide or sodium carbonate can be added to raise the pH reading. While it is high, hydrochloric acid or sodium bisulfate can be employed.
Adjust by adding small amounts at a time, stirring well between additions, and let it stand for a while before rechecking. Repeat the process until the pH reading level stabilizes as desired.
II. Deeply clean the swimming pool
1.Clean up floating objects on the water surface in time
After the introduction of chlorine tablets, leaves, dust, hair, and other particles will float on the water surface. In addition to the effect that the floating particles have on the pool’s appearance, the particles can also create a medium for bacterial breeding.
In order to correct this, you need to use a net bag or a skimmer to clear particles from the water surface daily. Take particular care around the corners and the water intake, as these are the places where the floating particles will collect.
2.Regularly scrub the pool wall and bottom
The bottom and walls of the pool are also prone to the formation of algae, scaling, and the presence of stains. If they are not cleaned for a long time, the disinfecting ability of the pool chlorine tablets will be lost, along with the deterioration of the water quality as a whole. You must brush the pool bottom and wall at least once a week, focusing on tile-to-tile spaces, drains, and other areas where dirt is most noticeable.
3.Filtration system maintenance
The pool filtration system is valuable equipment for maintaining the water pure. After introducing chlorine tablets, make sure that the filtration system is in perfect condition. Regularly monitor the filter pressure gauge. If the pressure gauge shows 0.7-1.4kg/cm², which is more than the original pressure, then it indicates that there are impurities in the filter. And it is time to carry out a backwash or replace the filter medium.
Additionally, observe the functioning of the filter pump for normal flow of water to stop it from degrading due to weak filtration.
Conclusion
Placing chlorine tablets is only the starting point of swimming pool care. The follow-up water quality checking, pool cleaning, and storage of chlorine tablets are of equal importance. As a professional chlorine tablet producer, we can guarantee you quality products.
With our technical expertise, we will help you create the perfect swimming pool environment. Let’s work together to preserve your sparkling blue pool!